But give the unit time to cool until it reaches the set temperature before the light stops flashing.To reset the Maytag refrigerator control panel, first unplug the refrigerator from its power source. Press it only one time and the audible alarm beeping stops. To reset the temp alarm on a Maytag refrigerator, locate the temp alarm button on the control panel. The same applies if the problem is from a faulty control board or loose sensor connections. If there is none, schedule a service check. Then, wait to see if there is an improvement. Set the refrigerator and freezer temperatures as low as possible to enable fast cooling. You may need to adjust them to accommodate the new development. However, if the temperature does not drop, check the settings. The only time the temp alarm stops flashing is when the temperature drops or you press the alarm reset button on the control panel. Wait an hour or two and check the internal temperature. Inspect the refrigerator contents and rearrange them if necessary to ensure the door fully closes. Therefore, check the door to ensure it is not open. The most probable reason for the alarm to flash or go off is that the door is open or the refrigerator has stopped cooling. The same happens if the freezer’s internal temperature is higher than 15 degrees Fahrenheit or -9 degrees Celsius. Typically, the temp alarm goes off if the refrigerator’s internal temperature is higher than 48 degrees Fahrenheit or 9 degrees Celsius for more than an hour and thirty minutes. Maytag Refrigerator Temp Alarm Flashing – Quick Fix Closing the refrigerator doors should reset the alarm by stopping the beeping and turning off the light. Note: These same steps apply if the door alarm keeps beeping. Hire a qualified technician to check and fix the problem. Also, the main control board may be malfunctioning, and since it governs the functions of the unit, it may be the source of the problem. If nothing seems to work, there may be a faulty sensor in the refrigerator or loose wiring, causing the Maytag refrigerator alarm light to always blink. Use a level to check whether or not the unit is balanced and adjust the legs or rollers accordingly, as this article explains. An improperly leveled Maytag refrigerator has functional issues, including alarm issues because the door does not fully shut. But if it is weak, replace the seal.Īdditionally, the refrigerator may not be level. Clean the seal if it is dirty or adjust it if it is loose. The door does not tightly seal, alerting the refrigerator that the door is open and triggering the alarm light. The same is true if the door seal is loose. Also, ensure all the items in the refrigerator are correctly stacked to prevent an overflow.įurthermore, check the door seal a weak or dirty seal keeps the door from shutting fully. Open the refrigerator door again and check the shelves, racks, and bins to see if any are sticking out. Something may be blocking the door’s path, keeping it from fully closing. Otherwise, the door ajar icon on the control panel will become lit.

When shut, the door must touch the door switch. Press any button on the refrigerator’s control panel to stop the alarm temporarily, but the icon will keep blinking until you shut the door. If you had to leave the door open for a while, the door alarm would beep every two minutes while the Door Ajar icon would blink. The door alarm light will blink only if the door is open or not properly shut. Get Instant Help - Ask An Experienced Verified Appliance Technician Maytag Refrigerator Door Alarm Light Blinking – What to Do.Maytag Refrigerator Door Alarm Not Working – Solved.Maytag Refrigerator Temp Alarm Flashing – Quick Fix.Maytag Refrigerator Door Alarm Light Blinking – What to Do.

Maytag refrigerator panel reset